Laboratory Incubator Ovens
Laboratory Incubator Ovens Overview
The Dual Purpose Oven/Incubator combines the advantage of two temperature ranges in one unit through the use of a simple high/low switch. Higher temperatures for oven or steriliser use on the high setting and standard incubator settings on the low range.
This cost effective, dual purpose oven/incubator combines the advantage of two temperature ranges in one unit through the use of a simple high/low switch.
Higher temperatures for oven or sterilise use on the high setting and standard incubator settings on the low range.
The exterior is constructed from sheet steel finished in an easy clean powder coated paint. The interior chamber is made from mild steel coated with aluminium (CLAD) with a stainless steel chamber available as an option.
Fitted with fixed shelf runners and removable plated wire grid shelves. The top vent is fitted with a clip to hold a mercury in glass thermometer. The vertical style units are fitted with the controls below the door, the horizontal style units with the controls fitted on the side.
Heated by Incoloy sheathed elements; positioned below the chamber floor for natural convection units and fitted around the fan on the back or side wall of the chamber for mechanical convection units.
The 200 litre units have fan circulation as standard.
The control system comprises of a direct reading thermostat and overheat thermostat both with calibrated scales and tamper proof locks. They also include main switch with indicator and heat and overheat indicators.
Options include a PID Microprocessor controller with dual displays of set point and actual temperature, which are auto-tuned for each individual unit to optimise the heat up, overshoot and control of temperature.
Please browse our website for more information about Airflow and our range of Labatory Incubator Ovens and contact us on 01142 327788 to speak to one of our team, or e-mail us at firstname.lastname@example.org.